Livarno LSL 10 A1 - Manual (Page 30)

LIVARNO LUX LSL 10 A1
28 - English
First use
After you have installed the LED spotlight as previously described, you can
connect the circuit again. You can now switch the LED spotlight on and off
via the corresponding light switch of your home lighting system.
Maintenance / Cleaning
Maintenance
The light bulb of the LED spotlight is a long-lasting LED It cannot be replaced
and does not require maintenance.
Cleaning
Ensure that no liquid can penetrate the housing. There is a risk of
an electric shock.
To clean the LED spotlight, use a soft, dry cloth and never use any solvent or
cleaner that would corrode the plastic materials. Use a slightly damp cloth
for more stubborn dirt.
Environmental and disposal information
When the crossed out wheelie bin symbol appears on a
product, this indicates that the product is subject to the
European Directive 2012/19/EU. All old electrical and
electronic devices must be separated from normal household
waste and disposed of at designated state facilities. The light
bulb must also be disposed of properly.
The device must not be disposed of with the household or bulky waste. You
can obtain information regarding collection points or collection times via
your local administration or local disposal services.
Dispose of the packaging in an environmentally compatible manner.
Cardboard can be put out for municipal paper collections or brought to
public collection points for recycling. Films and plastic used for packaging
the device are collected by your local disposal services and disposed of in
an environmentally compatible manner.
Conformity information
This device meets the basic requirements and other relevant
regulations of the EMC Directive 2004/108/EC, the Low
Voltage Directive 2006/95/EC, the ErP Directive
2009/125/EC and the RoHS Directive 2011/65/EU. The
Declaration of Conformity can be found at the end of these
operating instructions.