Livarno Z31237A Z31237B - Manual (Page 53)

53 GB/MT
Switching swivel
spots on / off
The LED light 1 is controlled
using the On / Off switch 3 .
This button has three settings:
Press on / off switch
once: high light output.
Press on / off switch
again: low light output.
Press the on / off switch
again: turns the light off.
Replacing
batteries
Slide the mounting plate
7 and remove from the
bracket. There are two
battery compartments at
the rear centre of the LED
light (see Fig. F).
Press the handle on the
battery compartment slightly
toward the compartment
and lift the battery