Livarno 6401–186L - Manual (Page 9)

9 GB
Preparing for use / Maintenance and cleaning / Disposal / Warranty and Service
or switch off the circuit breaker in the fuse box
(0 position).
CAUTION! RISK OF BURNS! Allow the
lamp to cool down completely.
Replace the bulb 2 only after it has fully
cooled. Use a clean, lint-free cloth when you
are replacing a bulb.
Remove the end cap 3b by pressing it lightly out
of the fastening and moving it away to the side.
Remove the cover 1 by moving it away to the
side.
Remove the bulb 2 by turning it a ¼ turn and
pulling it out of the socket.
insert the new bulb 2 into the socket and
tighten it with a ¼ turn. Check for correct fitting.
Note: Only use 220–240 V ∼ bulbs with a
maximum output of 18 Watt.
Reinsert the cover 1 and put the end cap 3b
back on the light housing.
Maintenance and cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
To clean the light , first of all disconnect it from the
mains circuit. To do this, remove the fuse or switch
off the circuit breaker in the fuse box (0 position).
CAUTION! RISK OF BURNS! Allow the
lamp to cool down completely.
CAUTION! RISK OF ELECTRIC SHOCK!
For electrical safety reasons, never clean the light
with water or other fluids nor immerse it in water.
Only use a dry, lint-free cloth for cleaning.
Do not use solvents, petrol etc. Otherwise the
light will be damaged.
Disposal
The packaging and ancillary packing consist entirely
of environmentally friendly materials. They can be
disposed of at your local recycling facility.
The symbol of the wheelie bin with the line
through it means that, in the European
Union, the product has to be disposed of
in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Products marked in this way may not be disposed
of along with normal domestic waste but have to be
handed in at a recycling collection point for electrical
and electronic appliances. Recycling helps the reduce
the consumption of raw materials and protects the
environment.
Warranty and Service
Warranty Declaration
This product has a 3-year warranty from the date of
purchase; the warranty is only valid for the original
purchaser and is not transferable. Please keep your
receipt as proof of purchase. The warranty applies
to material or manufacturing defects only. It does not
cover wear parts or damage caused by improper
use. The guarantee lapses in cases of unauthorized
tampering. Your statutory rights are not restricted in
any way by this warranty. Please contact the service
centre by telephone. In the event of any claims under
the warranty. This is the only way to ensure that your
instrument can be returned free of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Phone: +49 (0) 29 61 / 97 12–0
Fax: +49 (0) 29 61 / 97 12–199
Email: [email protected]
IAN 73850
Please have your receipt and the product number
(e.g. IAN 12345) available for all queries as proof
of purchase.