Livarno Z31207A-BS Z31207B-BS - Manual (Page 4)

4 GB/IE/CY
Table lamp
Introduction
Before using the device for the first time, take time
to familiarise yourself with the product. In addition,
please carefully refer to the operating instructions
and the safety advice below. Only use the product
as instructed and only for the indicated field of ap-
plication. Keep these instructions in a safe place. If
passing this product on to a third party also include
all documents.
Proper use
This lamp is intended for indoor use in dry and en-
closed rooms only. The product is not intended for
commercial use.
Technical data
Nominal voltage: 230 V ∼, 50 Hz
Illuminant:
230 V∼, max. 42 W, E14,
halogen bulb (illuminant not
included in the delivery)
Protection class:
Scope of delivery
Check that all the items and accessories are present
and that the device is in perfect condition immedi-
ately after unpacking.
1 Touch Lamp
1 Operating instructions
Safety advice
The right to claim under the warranty shall be ren-
dered invalid in respect of damage caused by the
non-observance of these operating instructions! No
liability is accepted for consequent damage! No
liability is accepted for damage to property or per-
sons caused by improper handling or non-obser-
vance of the safety advice!
DANGER OF
LOSS OF LIFE AND ACCIDENT
TO INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Always
keep the product out of reach of children.
Children or persons who lack knowledge or
experience in handling the device or who have
limited physical, sensory or mental abilities
may not use the device without supervision or
without instruction by a person responsible for
their safety. Children must be supervised at all
times to prevent them from playing with the ap-
pliance.
This lamp is designed for indoor use
in dry and enclosed rooms only.
Check the lamp and the mains lead for dam-
age each time before connecting them. Never
use your lamp if you discover that it is dam-
aged in any way.
CAUTION! The lamp shield is not replaceable.
Dispose of the lamp if you find cracks or other
damage to the lamp shield.
This product’s external flexible tube is non-re-
placeable. Hence, if it becomes damaged you
must dispose of the entire product.
Protect the mains lead against sharp edges,
mechanical stresses and hot surfaces.
Always unplug the mains plug from the socket
before installation, dismantling or cleaning.
Disconnect the product from the mains supply if
it is not going to be used for some time (e.g.
holiday).
Only use 230 V ∼ halogen light bulbs with a
E14 base and a maximum output of 42 watt.
Set the lamp in a stable, clean and even place.
0.5 m
FIRE HAZARD! Fit the light so that
it is at least 0.5 m away from the
material illuminated. Fire can result
from the development of too much heat.