Livarno Z31159A-BS Z31159B-BS - Manual (Page 35)

35 GB/MT
Never open or insert anything into elec-
trical fittings or equipment (e.g. switches,
fitting socket). Doing this sort of thing
can lead to a serious danger to life from
electric shock.
Avoiding fire hazards and
risk of injury
Connect the under-cupboard light to the
mains supply using the original mains
lead only.
Connect only original under-cupboard
lights of the same type (Model Z31159A /
Z31159B) with each other. To do so, use
only the original connection cable supplied.
Make sure that you only connect a maxi-
mum of three linked-up under-cupboard
lights of the same type to one socket.
Otherwise this might overload the con-
nections and cables.
CAUTION! RISK OF BURNS! Ensure
the lamp has been switched off and
allowed to cool before you touch it.
Light bulbs develop a great deal of heat.
Replace defective bulbs immediately.
Before replacing the bulb always
remove the mains plug from the socket.
Do not use this light for dimmers or elec-
tronic switches. It is not suitable for this
mode of operation.
0.2 m
FIRE HAZARD! Fit the light
so that it is at least 0.2 m
away from the material illumi-
nated. Fire can result from the develop-
ment of too much heat.
Do not allow any objects to cover the light.
Fire can result from the development of
too much heat.
Preparation
Required tools and
materials
The tools and materials referred to are not
included in delivery. The details and values
given are non-binding and for guidance
only. The condition of the material is deter-
mined by the individual local conditions.
– Pencil / Marking tool
– Screwdriver
– Electric drill
– Drill
– Ruler
– Cable detector