Bringing into use, Maintenance and cleaning changing the bulb – Livarno Z31202A -BS / Z31202B -BS / Z31202C -BS User Manual
Page 12
12 GB/IE
Bringing into use
Attach the lamp in the desired position by means of the clamp
5
.
Use the ON / OFF switch
4
to switch the lamp on or off.
Bend the lamp shade
1
by dint of the hinge
6
to bring the
lamp into the desired position.
Note:
The lamp shade can be moved horizontally for 315°
and vertically for approx. 90° (see Fig. B).
Maintenance and Cleaning
Changing the bulb
Only use fluorescent spots with GU10 fitting and a rated
voltage of 230 V∼ and a max wattage of 7 W.
Before changing the bulb, switch off the lamp and remove the
mains plug from the socket. If necessary, let the existing bulb
cool down for 15 minutes.
Remove the old bulb from the socket by turning it anticlockwise
for 90° and then carefully tear it out of the socket. Act contra-
riwise for fitting the new bulb (see fig. C).