Livarno Z31410A-BS/ Z31410B -BS - Manual

GB/IE GB/IE GB/IE
J If the external flexible cable
or cord of this luminary is
damaged, it shall be replaced
by a special cord or cord
exclusively available from
the manufacturer or his
service agent.
J For installation, please con-
tact qualified electrician if
you have any doubt.
J Never let the lamp come
into contact with water or
other liquids.
J Before assembly, ensure that
the mains voltage (230 V~
50 Hz) available corresponds
to the operating voltage
necessary of the light.
To avoid danger
of fire and injury
J RISK OF IN-
JURY FROM
BURNS! Ensure
the lamp has been switched
off and allowed to cool before
you touch it. In this way you
will avoid the danger of burns.
Bulbs give off a lot of heat
around the top of the lamp.
J Do not use this light for dim-
mers or electronic switches.
It is not suitable for these
purposes.
Working safely
J Install the lamp so that it is
protected from moisture and
dirt.
Model B
Operating voltage: 230 V~
50 Hz
Lamps: 40 power
LED (LED
cannot be
replaced)
LED: 40 x 0.1 W
Nominal power: max. 5 W
Protection
category:
Q Safety
Safety advice
YOU SHOULD STORE ALL
SAFETY INFORMATION AND
INSTRUCTIONS IN A SAFE
PLACE IN CASE YOU NEED
TO REFER TO THEM AGAIN
IN THE FUTURE!
J Children or other individuals
who do not know or have
no experience of handling
this device, or whose physical,
sensory or mental abilities
are restricted, must not use
the device without supervi-
sion or instruction by an in-
dividual responsible for their
safety. Children must be
supervised in order to en-
sure that they do not play
with the device.
J Do not attach the light to
damp or conductive sub-
strates.
To avoid danger
to life from
electric shock
J Never use your lamp if you
discover that it is damaged
in any way.
LED under-cabinet light
Q Proper use
The under-unit lights are intended
for providing illumination and
for mounting on furniture. The
under-unit lights can also be
mounted on walls. The product
may only be used indoors in dry
rooms. The lamps cannot be re-
placed. The lights can be mounted
on all normally flammable sur-
faces. This device is intended for
indoor use only in a domestic,
private household environment.
Q Description of
parts and features
1 ON/OFF switch
2 Socket for connecting lead
3 LED
4 Protective cap (for Model B
only)
5 Connecting lead with mains
plug
6 Extension connector (for
Model B only)
7 Mounting bracket
8 Dowel ø 6 x 30 mm
9 Screw for wall mounting
10 Screw for under cabinet
installation
Q Technical data
Model A
Operating voltage: 230 V~
50 Hz
Lamps: 60 power
LED (LED
cannot be
replaced)
LED: 60 x 0.1 W
Nominal power: max. 7 W
Protection
category:
approx.140°
approx.140°
A
Z31410A-BS/
Z31410B -BS
LED UNDER-CABINET
LIGHT
Assembly and safety advice
3
1
8 2 x
9 2 x
5
7 2 x 10 2 x 2
3
8 2 x
9 2 x
10 2 x 7 2 x 5
6 1 4
6 4
2
6
Z31410A-BS
Z31410B-BS
Z31410B-BS
85873_livx_Unterbauleuchte_BS.indd 1 07.12.12 10:00