Livarno Z31390 - Manual (Page 13)

13 GB/IE
3. Insert the solar cell housing 1 into the lamp
shade 2 and tighten by turning it clockwise.
4. Place the light on to the pole 3 .
5. Take out the ground stake 4 from the pole 3
and insert it into the pole 3 with the tip facing
downwards (see Fig. D).
6. Your solar lamp is ready for use (see Fig. E).
Setting up the light
Insert the assembled solar light far enough
into the ground (lawn, flower bed) for it to be
stable.
Make sure you keep proper footing and bal-
ance at all times. Do not use any force when
assembling or setting-up the product, e.g.
hammer blows. This will damage the product.
In order to achieve the best result, set the
solar garden lamp up in a place where the
solar cell will get direct sunlight for as long as
possible.
Make sure that the solar cell is not influenced
by any other source of light such as yard or
street lighting as otherwise the light will not
come on in twilight.
86287_livx_Solarleuchte_content_LB3.indd 13 02.01.13 12:28