Livarno Z31358-BS - Manual

GB / IE GB / IE
J CAUTION! DANGER OF
EXPLOSION! Do not operate
the LED work lamp in potentially
explosive environments in which there are
inflam mable vapours, gases or dusts.
J The LED work lamp is protected against water
spray. However, the product, mains adapter
and car adapter must never be immersed in
water or other liquids. Failure to observe this
advice will create the risk of electric shock!
Never hang the product near a washbasin,
pond and the like.
J Connect the LED work lamp to a properly
installed mains socket or a suitable cigarette
lighter socket only. The voltages in each case
must comply with information given in the
section “Technical data”.
J Ensure that the electrical socket is easily
a risk of suffocation if children play with the
packaging material. Children often underesti-
mate risks. Always keep children away from
the packaging material. This product is not a
toy.
J Children or persons who lack the knowledge
or experience to use the device or whose
physical, sensory or intellectual capacities are
limited must never be allowed to use the
device without supervision or instruction by a
person responsible for their safety. Children
must never be allowed to play with the device.
J This product is not a toy and should be kept
out of the reach of children. Children are not
aware of the dangers associated with han-
dling electrical products.
J Do not use the article if you detect any kind
of damage.
GB / IE GB / IE GB / IE
GB / IE GB / IE GB / IE
accessible so that you can pull the plug
quickly out of the socket if necessary.
J Do not carry out any modifications or repairs
to the product yourself. The LEDs cannot and
must not be replaced.
CAUTION! The protective surround to the
LEDs cannot be replaced. Dispose of the LED
work lamp if you discover cracks or signs of
fracture on the protective surround.
J Dispose of the product if the LED work lamp,
mains adapter or car adapter is damaged.
J Never connect the LED work lamp to a power
supply socket if the LED work lamp, power
lead or socket is damaged or the LED work
lamp has been dropped.
J Ensure that the power lead cannot become
damaged by sharp edges or hot objects.
Unwind all the lead completely before use.
J Keep easily flammable materials away the
product. Never hang objects above the LED
work lamp or the mains adapter and never
cover them.
J Pull the mains adapter / plug out of the mains
socket / cigarette lighter socket when you are
not using the LED work lamp or before you
clean it. Do this as well if signs of a fault
develop during use or charging, e.g. smoke,
burning smell etc., or during a storm. When
doing this, pull directly on the mains adapt-
er / plug and not on the lead.
J Protect the product against heat, cold, strong
vibrations and impacts.
J Do not attach the hook 1 to hot objects. The
dead weight of the LED work lamp might
cause the hook to deform or bend out of shape.
Q Before use
Q Charging the LED work lamp
Note: You can charge the LED work lamp from
an ordinary domestic mains power outlet or from
the cigarette lighter socket in your vehicle.
Tip: We recommend that you charge the LED
work lamp from an ordinary domestic mains power
outlet to avoid draining your vehicle’s battery.
CAUTION! Do not connect the LED work lamp
to the cigarette lighter socket of your vehicle if the
vehicle battery is old or degraded. Failure to
observe this advice may result in your vehicle’s
engine not starting.
Note: To use the LED work lamp without an
adapter, you must first charge the integral
rechargeable batteries. It takes 11 hours to charge
the integral batteries. The rechargeable batteries
LED WORK LAMP
Q
Proper use
The product is intended for providing illumination
in dry indoor rooms and in outdoor environments.
If used outdoors the mains adapter must be pro-
tected from moisture and the weather. The prod-
uct is not intended for commercial use.
Q Description of parts and
features
1 Hook
2 Indicator LED
3 Mains adapter
4 Car adapter (for cigarette lighter socket)
5 ON / OFF switch
6 Power input connection socket
Q Technical data
Light bulb: 60 LEDs (white,
non-replaceable)
Lamp rechargeable
batteries: 3 x AA NiMH, 1800 mAh
(not replaceable)
Charging time: approx. 11 hours
Burn time: approx. 1.5 hours (with
fully charged battery)
Lifespan of LEDs: approx. 100,000 hours
Protection class:
System of protection: IP44
Adapter:
Input: 100-240 V ~ 50 Hz
Output: 9 V , 500 mA
Model: SA/6PA/12FUK090050
Protection class:
System of protection: IP20
Cigarette lighter:
Input: 12 V
Output: 12 V
Q
Scope of delivery
1 LED work lamp
1 Mains adapter
1 Car adapter for cigarette lighter socket
1 Operating instructions
Safety instructions
J WARNING!
DANGER TO
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children alone and unsupervised
with the packaging material. There is always
LED WORK LAMP
Operation and Safety Notes
6
Z31358-BS
2
3
4
1
6
5
78535_GB_IE.indd 1 10/11/2012 12:43:33 PM