Silvercrest DZ 20 - Manual (Page 114)

114 GB/MT
(De) Activating the
random function
The random function will only work at night,
from 6:00 pm until 6:00 am.
This requires programs to be set for this
timeframe.
With random mode activated, the device
will switch the configured programs with a
random delay of 10 to 31 minutes.
Activating the random function
Check if the device is in AUTO 17
mode. If not, set to AUTO 17 (see
„Setting the operating mode“).
Press the RANDOM 4 button. The R
symbol 14 will appear in the LCD 1 .