Epson 1680 User Manual
Page 130
Solving Problems
123
Your scanned image is faint or has
gaps.
■
Check the brightness. Decrease
the software or driver’s
brightness setting.
■
Try adjusting the
Gamma
and
Exposure
settings in the Image
Controls window.
■
Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show
up in your scan.
■
Make sure the document is
placed flat against the document
table.
Your scanned image is blurred or
distorted.
■
Check the position and
condition of your document.
Make sure the document is
placed flat against the scanner’s
document table glass. If only
part of the image is blurred, part
of your document may be
wrinkled or warped.
■
Make sure the document table
glass is clean.
■
Make sure the scanner is on a
flat, stable surface.
1680.book Page 123 Thursday, March 1, 2001 4:28 PM