Epson 1680 - Manual (Page 44)

Setting Up Your Scanner
37
Testing the Scanner’s Operation (Windows 98)
Follow these steps to test scanner operation:
1. Open the Windows Control Panel and
double-click the Scanners and
Cameras icon to open the Scanners
and Cameras Properties window.
The Scanners and Cameras Properties screen above illustrates a USB
connection and may look slightly different for SCSI and FireWire
connections.
2. Make sure EPSON Expression 1680 is
selected, and then click the Properties
button.
3. Click the Test Scanner or Camera
button. If the scanner is operating
properly, a confirmation message
appears. Click
OK to close the message.
Device Ready appears next to Status .
4. Click OK to close the Properties
window.
1680.book Page 37 Thursday, March 1, 2001 4:28 PM