Silvercrest SKM 500 B1 - Manual (Page 10)

7 SKM 500 B1
GB
WARNING! RISK OF INJURY!
►
Caution: the cutting knife, the cutting, shredding and grating discs
and the mixing knife are extremely sharp! For this reason, take
care when cleaning.
►
Caution: the cutting knife, the cutting, shredding and grating discs
and the mixing knife are extremely sharp! For this reason, take
care when emptying the mixing bowl and the blender.
►
When the appliance is operating, do not put anything other
than the ingredients to be processed into the mixing bowl or the
blender.
►
Do not put hands and foreign objects in the to fi lling shaft or the
mixer to avoid the risk of injury or damage to the appliance.
►
Do not change accessories unless the drive is stationary and the
mixer is unplugged from the power supply! The appliance will run
on for a short time after being switched off !
►
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in mo-
tion during operation, the appliance must be switched off and
disconnected from mains power.
CAUTION - PROPERTY DAMAGE!
►
Never fi ll the blender with boiling fl uids, such as soup! Allow
these to cool until lukewarm.
Initial start-up
■ Clean the appliance as described in the chapter “Cleaning and Care”.
■ Place the appliance on a fl at and clean surface.
■ Attach the appliance to the subsurface with the suction cups so that it is fi xed.
■ Unwind the power cord from the cord storage a and then attach it to the
cable leadthrough.
■ Assemble the appliance as described in the chapter entitled “Assembly”
depending on the type of use.
IB_103418_SKM500B1_LB4.indb 7 17.10.14 14:37