Silvercrest SKM 500 B1 - Manual (Page 12)

9 SKM 500 B1
GB
Mixing bowl with food processor
NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Fit the drive shaft i to the shaft holder.
2) Place the mixing bowl u onto the motor block o so that the arrow is
pointing at the symbol and rotate the mixing bowl u until the arrow
is pointing at the symbol
. The mixing bowl u is now fi xed.
3) Select a suitable disk 0 q w (see chapter “Working with the food processor”)
and insert it into the disk adapter e:
–
if a diff erent disk is still installed: Press the metal tab of the disk outwards
so that it slides over the locking mechanism on the disk adapter e. You
can now remove the disk.
–
insert the new disk with the narrower side fi rst into the recess in the
disk adapter e (Fig. 1) and push the disk fi rmly downwards so that it
engages and is fi rmly seated (Fig. 2).
Fig. 1 Fig. 2
4) Place the disk adapter e with the disk fi tted onto the drive shaft i.
5) Put the lid 3 onto the mixing bowl u so that the arrow on the lid 3
points to the symbol on the mixing bowl u. Then rotate it until an
audible “click” is heard and the arrow is pointing to the symbol .
IB_103418_SKM500B1_LB4.indb 9 17.10.14 14:37