Servicing/cleaning, Environmental and disposal information, Conformity information – Silvercrest SBiT 82 B2 User Manual
Page 57
SilverCrest SBiT 82 B2
English - 55
Servicing/cleaning
It is necessary to service the device if it has been damaged in any way, for example, if the housing
is damaged, if liquid or objects have penetrated the device or if the product has been exposed to
rain or moisture. Servicing is also required if the device is not working properly or has been
dropped. If smoke is produced, or there are any unusual sounds or smells, disconnect the device
immediately from the mains. In these cases, the device should not be used until it has been
inspected by authorised service personnel. Only have the device serviced by qualified personnel.
Never open the housing of the device. There is the risk of a fatal electric shock when the housing is
open. Only use a clean, dry cloth for cleaning and never use any corrosive liquids.
Environmental and disposal information
When the crossed out wheelie bin symbol appears on a product, this indicates that the
product is subject to the European Directive 2002/96/EC.
All old electrical and electronic devices must be separated from normal household
waste and disposed of at designated state facilities. The correct disposal of old devices in this
manner will prevent environmental pollution and human health hazards.
For further information about proper disposal, contact your local authorities, waste disposal office
or the shop where you bought the device.
Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for
municipal paper collections or brought to public collection points for recycling. Films and plastic
used for packaging the device are collected by your local disposal services and disposed of in an
environmentally compatible manner.
The integrated battery cannot be removed for disposal.
Conformity information
This device meets the basic requirements and other relevant regulations of the EMC
Directive 2004/108/EC as well as the RoHS II Directive 2011/65/EU. The
Declaration of Conformity can be found at the end of this manual.