Eaton Electrical Disconnect Switches - Manual (Page 3)

2
For more information visit us at: www.eatonelectrical.ca
December 2004
Product Description
Rotary Disconnect Switches
Product Description
Non-fused
■ R & W frame, 30A – 80A, non-fusible
600V AC , suitable for use in
equipment or machinery as a motor
disconnect.
■ Manual motor controller suitable for
motor disconnect,
horsepower and
Amp rated, load break rated, meeting
requirements of CSA C22.2 No 14 CEC
rule 28-602 (3) (b) and UL508 “suitable
for motor disconnect.” 10 kVA short
circuit rating when used in conjunction
with Class J fusing.
■ C, V, & S Frame, 30A - 1200A,
non-fusible, 600V AC, rated
250 V DC inclusive to 600A. Suitable
for use as motor or industrial con-
trol panel disconnects, horsepower
and Amp rated, load break rated,
meeting requirements of CSA C22.2
No 4 and UL98.
Fusible
■ 30A - 800A fusible 600V AC,
C, V & F Frame , rated 250 V DC
inclusive to 400A. Suitable for use
as motor or industrial control panel
disconnect, suitable for use as a
service entrance disconnect, horse-
power and Amp rated, load break
rated, meeting requirements of CSA
C22.2 No 4 and UL98.
Features, Benefits and Functions
■ Fusible and non-fusible
■ Rotary or toggle operation
(non-fused)
■ Motor disconnects available
approved to CEC rule
28-602(3)(b)
■ Base mounting or DIN rail mounting
■ Compact design to minimize panel
space requirements
■ Pistol type or selector type handles
for through-the-door operation.
■ Toggle type handle for internal
panel mounting
■ Variable depth – complete range of
shafts that can be cut for specific
enclosure depths
■ Clear ON and OFF indication.
■ Padlockable in the OFF position with
up to three padlocks.
■ Interlocked, defeatable handle avail-
able. Allows access by authorized
personnel in the ON position.
■ ON/OFF/TEST (3 position) handles
allow testing of the control circuit
auxiliaries without switching the
main contacts.
■ Optional N/O, N/C auxiliary contacts
available
■ Visible blade indication up to 200A
(non-fused C & V frames)
■ Line side shrouds standard on all
ratings for C, S, V & F frames
■ Load side finger shrouds standard
on non-fusible 30-100A C & V frame
and 30-60A fusible.
■ Optional shrouds available for
higher ratings of V, S & F frame
■ Terminal lugs standard for C & V
frame 30-100A non-fused and
30-60A fusible.
Standards and Certifications
R- W-Frames
■ UL 508
■ CSA C22.2 No 14
CEC rule 28-602(3)(b)
■ IEC 60-947-3
C-, V-, S-, F-Frames
■ UL 98
■ CSA C22.2 # 4
■ IEC 60-947-3
■ CE
Options and Accessories
■ Neutral modules.
■ Auxiliary contacts.
■ 4th pole modules.
■ Protective earth modules.
C-Frame
Non-Fusible C-Frame
Fusible V-Frame
Non-Fusible
S-Frame
Non-Fusible
V-Frame
Fusible
R-Frame
Non-Fusible
W-Frame
Non-Fusible
F-Frame
Fusible
NOTE: Photo does not represent proportional sizing between frame types