Silvercrest SIUR 10 A1 - Manual (Page 144)

141 SIUR 10 A1
GB
NOTE
► The alarm becomes active again when the next alarm time has arrived
(i.e. on the next day).
Radio operation
NOTE
► For good radio reception the cable antenna must be completely
unwound. Align the aerial for the best reception in radio mode.
Switching the radio on/off
♦ Switch the radio on by pressing the key on the device or the key
on the remote control. The display shows the current reception frequency.
♦ If you want to switch the radio off , either press the key on the device
or the key on the remote control. The device will then change back
to the clock/standby operating mode and show the current time.
Adjusting the volume
♦ Stroke your fi nger from left to right across the < Volume >
control point
on the device to increase the volume.
♦ Stroke in the opposite direction to decrease the volume. You can also press
the Vol+ key
to increase the volume using the remote control, or the
Vol– key to decrease it.
Switching between mono and stereo
♦ If interference occurs when playing radio programs in stereo, touch the
ST.|MO key
on the device or press the ST MO key on the remote
control. The Stereo wording in the display will then go off .
♦ Touch the ST.|MO control point on the device or press the ST MO
key on the remote control to switch back to stereo play.
IB_86209_SIUR10A1_LB1.indb 141 IB_86209_SIUR10A1_LB1.indb 141 11.03.13 09:21 11.03.13 09:21