Silvercrest SIUR 10 A1 - Manual (Page 149)

146 SIUR 10 A1
GB
Display representations
♦ Touch the Display control point while in radio or iPort operating mode,
or press the display key on the remote control in order to alternately
display the frequency of the radio station already set or the title number and
local time with the date.
♦ Touch the Display control point on the device while in time/standby
operating mode, or press the display key on the remote control, to alter-
nately display the local time with the date and the world time (
CITY
) .
♦ Touch the Display control point on the device while in any operating
mode, or press the display key on the remote control, to switch off the
alternative display representation
ALT OFF
briefl y appears on the display.
The local time with the date is displayed in time/standby operating mode. The
frequency of the radio station you have set, or the title number, will be displayed
in radio or iPort operating modes.
Reset to factory state
♦ Touch and hold the key on the device, or the key on the remote
control, until the word
RESET
appears in the display .
The device has now been reset to the factory state and the welcome message
PLEASE WAIT FOR SETTING THANKS
will now appear in the display . All
saved settings (radio stations, SDA alarms etc.) have now been deleted and will
need to be reset.
Cleaning
DANGER
Danger to life due to electric current!
► Remove the plug from the mains power socket before beginning to clean
the device.
CAUTION
Damage to the device!
► To avoid irreparable damage, ensure that no moisture penetrates into the
device whilst it is being cleaned.
Cleaning the housing
■ Clean the surfaces of the device with a soft, dry cloth.
IB_86209_SIUR10A1_LB1.indb 146 IB_86209_SIUR10A1_LB1.indb 146 11.03.13 09:21 11.03.13 09:21