Silvercrest SHSS 12 A1 - Manual (Page 39)

36 SHSS 12 A1
GB
MT
Using the hand element
1) Remove the hand element 5 from the hand
element recess r as described in the chapter
"Assembly/disassembly".
2) If required, you can attach the crevice tool o.
3) Set the on/off switch 2 to "I" to start vacuuming
to the desired areas.
4) When you are fi nished vacuuming, set the on/
off switch 2 to "O".
Cleaning and care
WARNING! RISK OF INJURY!
► Always disconnect the charger p from the
mains socket and remove the barrel jack a
from the charging socket 4 on the hand ele-
ment 5 before cleaning the appliance.
► Always remove the hand element 5 from the
hand element recess r on the handle before
cleaning the handle or rotary brush t.
► Always pull the fl oor nozzle off the handle
before cleaning or maintaining it and the
rotary brush t.
To achieve the best results, empty the dirt con-
tainer 9 and clean the dust fi lter 7 after every
use.
ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive or aggressive cleaning
materials. These could damage the surfaces!
Emptying the dirt container
1) To open the dirt container 9, remove the hand
element 5 from the hand element recess r.
2) Press the PUSH 6 button and, at the same
time, pull the dirt container 9 upwards.
You can now lift this off upwards/forwards
(Fig. 3).
Fig. 3
3) Remove the dust fi lter 7 by pulling it out with
your fi ngers. Rinse the dust fi lter 7 in clear
water and let it air dry. Do not use hot air to
dry the dust fi lter 7.
4) Then remove the coarse fi lter 8 also by simply
pulling it out.
Fig. 4
5) Empty the dirt container 9.
6) Now you can re-insert fi rst the coarse fi lter 8
and then the dust fi lter 7.
7) Replace the dirt container 9 by fi rst inserting
the plastic clip in the notch in the hand ele-
ment 5 and then pushing the front part of the
dirt container 9 downwards hard so that the
dirt container 9 clicks fi rmly into place.
Cleaning the appliance
Wipe the appliance with a damp cloth. For stubborn
residues use a mild detergent on the cloth. Ensure that
the appliance is completely dry before the next use.