Epson Dreamio EMP-TW1000 U - Manual (Page 30)

28
Configuration Menu Functions
List of configuration menus
When no image signals are being input, the "Image" menu and the "Signal" menu cannot be adjusted.
Also, the items displayed in the "Image" menu, the "Signal" menu and the "Info" menu will vary
depending on the type of image signals that are being projected.
Displayed for input sources other than computer * This is displayed in the line menu.
Image
Sharpness * p.30
Reset Yes, No p.31
Auto Iris p.31 On, Off
Vert. Line Enhancement, Horiz. Line Enhancement
Thin Line Enhancement, Thick Line Enhancement Advanced
Standard
Abs. Color Temp. * p.30
Color Saturation * p.30
Tint * p.30
Brightness * p.30
Signal
Only displayed for Computer input
(does not appear when signals from the [HDMI] input port are being input)
Zoom Caption Pos. p.31
Position p.31
Motion Detection p.32
Tracking p.31
Aspect p.31 Auto, Normal, Full, Zoom, Wide
Zoom Size p.31
Reset Yes, No p.33
Auto Setup p.31 On, Off
p.32 Off, Video, Film/Auto Progressive
Setup Level p.32 0%, 7.5%
p.33 HDMI Video Range Normal, Expanded
p.31
Noise Reduction p.32 Off, NR1, NR2, NR3
Displayed for input sources other than computer
p.32 EPSON Super White On, Off
Contrast * p.30
p.30 Skin Tone *
Sync. p.31
Output Scaling Auto, 100%, 98%, 96%, 94%, 92%
p.31 p.32
RGB
Customized
Reset
2.0 , 2.1 , 2.2 , 2.3 , 2.4
Adjust it from the image
Adjust it from the graph
Gamma
RGBCMY
Offset R, G, B
Gain R, G, B
R (Hue/Saturation), G (Hue/Saturation),
B (Hue/Saturation), C (Hue/Saturation),
M (Hue/Saturation), Y (Hue/Saturation)
Advanced p.30
Brightness Control p.31 High, Low
Color Mode Dynamic, Living Room, Natural, Theatre,Theatre Black 1, Theatre Black 2 p.30