Epson Dreamio EMP-TW1000 U - Manual (Page 54)

52
Specifications
■ Angle of tilt
If you set the projector higher than 15 º , it could damage the projector and cause an accident.
■ RS-232C cable layout
Safety
USA
UL60950-1
Canada
CSA C22.2 No.60950-1
EU
The Low Voltage Directive
(73/23/EEC)
IEC/EN60950-1
EMC
USA
FCC Part 15B Class B (DoC)
Canada
ICES-003 Class B
EU
The EMC Directive
(89/336/EEC)
EN55022 Class B
EN55024
IEC/EN61000-3-2
IEC/EN61000-3-3
Australia/New Zealand
AS/NZS CISPR 22:2002 Class B
• Connector shape : D-Sub 9-pin (male)
• Projector input connector : RS-232C
<At projector> (PC serial cable) <At computer> Signal Function
GND 5 5 GND GND Signal wire earth
RD 2 3 TD TD Transmit data
TD 3 2 RD RD Receive data
DTR 4 6 DSR DSR Data set ready
DSR 6 4 DTR DTR Data terminal ready
<At projector> <At computer>