Equator WB 818 User Manual

Page 12

Advertising
background image

● Overcharge of water.

●Tub seal (torn, worn or loose).

● Dishwasher door not sealing

properly.

●Dishwasher is not level.

● Overburden (wrong type of

detergent).

●Hose clamps loose.

● Heater element mounting nuts

loose.

●Water seal leaking.

●O-ring is not in position.

● Motor and pump assembly not

seated proper in tub liner bottom.

◇ Check and correct for proper

fill.

◇Replace tub seal.

◇ Adjust door latch assembly

and/or strike.

◇Level dishwasher properly.

◇Instructs customer/user.

◇Tighten all clamps securely.

◇Tighten the nut.

◇Use a new water seal.

◇Adjust the ring or replace a new.

◇Replace seal.

Poor wash ability.

●Spray arm not rotating.

●Improper loading of dishes, pans

and other.

●Detergent dispenser inoperative.

● Insufficient amount of detergent.

Or the detergent is old.

●Damaged or the impeller is broken.

●Detergent not dissolve.

◇Check for proper rotation.

◇ Instructs customer/user on

proper loading per owner’s

guide.

◇Repair or replace dispenser.

◇On proper amount of fresh deter

gent to use.

◇Replace pump assembly.

◇Incoming water temperature of

140 ° F is required to proper

dissolve detergent.

Poor drying of dishes

● Improper loading of dishes, pots

and other.

●Heating element (open).

● Incoming water temperature too

low.

● Wiring or terminal (broken or

burnt).

◇ Instruct customer/user on

proper loading per owner’ s guide.

◇Replace heating element.

◇Incoming water temperature of

140°F for best drying results.

◇Replace or repair.

Detergent cup will not open.

●Cup binding.

●Roll pin retainer or shaft broken.

●Defective bi-metal.

●Timer contact (open or broken).

◇Repair or replace.

◇Replace pin, retainer or shaft.

◇Repair or replace.

◇Replace timer.

Door will not lath.

●Door latch damaged.

◇Replace door latch.

Rinse agent liquid will not

eject.

●Electromagnetic valve defective.

●Rinse agent dispenser not mounted

correctly.

● Plunger stuck or held in closed

position.

◇Replace valve.

◇Mount securely to rear of inner

door panel.

◇Free plunger or adjust plunger

release.

Rinse agent liquid leaks.

●Container cracker or broken.

◇Replace container.

12

Advertising
This manual is related to the following products: