Epson AcuLaser C9300 - Manual (Page 17)

Installing Components on Your Computer
About Installing Components on Your Computer
Before configuring the network interface and printing from the computer, you need to install the
necessary components (such as TCP/IP) and assign an IP address and subnet mask for your computer,
depending on the printing method you want to use. See the section in this chapter appropriate for your
operating system.
Note:
❏ The Windows operating system CD-ROM may be required during the installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP address, the subnet mask, and the
default gateway of the computer.
Windows 7/Vista/Server 2008
Use the following procedure to install the necessary components.
1. Click Start, click Control Panel, and then click View network status and tasks or double-click
Network and Sharing Center .
2. Click Local Area Connection (Windows 7), or View Status (Windows Vista/Server 2008), and
then click the Properties button.
Note:
If the User Account Control screen appears, click the Yes or Continue button.
Epson Network Guide
How To 17