Epson EPL-N7000 - Manual (Page 318)

Troubleshooting 307
9
9
9
9
9
9
9
9
9
9
9
9
The printer does not print (Ready light off)
The Ready light is on but nothing prints
Cause What to do
The printer is offline. Press the N Start/Stop button once to
switch the printer to ready status.
Cause What to do
Your computer may not be
properly connected to the
printer. Perform the procedure described in
“Connecting the Printer” in the Setup
Guide
.
The interface cable may not be
plugged in securely. Check both ends of the interface cable
between the printer and the computer.
If you are using the parallel interface, be
sure to secure the connector using the
wire retaining clips.
You may not be using the
correct interface cable. If you are using the parallel interface,
make sure that the cable is a
double-shielded, twisted-pair interface
cable no more than six feet in length.
If you are using the USB interface, use a
Revision 2.0 cable.
Some error may have
occurred. Check the LCD panel to see if an error
message appears.
Your application software is
not properly set up for your
printer. Make sure that the printer is selected in
your application software.