Epson EPL-N7000 - Manual (Page 325)

314 Troubleshooting
Completely blank pages are output
The printed image is light or faint
Cause What to do
The printer may have loaded
more than one sheet at a time. Remove the paper stack and fan it. Tap
it on a flat surface to even the edges.
Then reload the paper.
There may be no toner left in
the imaging cartridge. If the message on the LCD panel or in
the EPSON Status Monitor 3 indicates
that the amount of toner is low, see
“Replacing the imaging cartridge” on
page 258.
The problem may be with your
application or interface cable. Print out a status sheet. See “Printing a
Status Sheet” on page 304. If a blank
page is ejected, the problem may be
with the printer. Turn off the printer
and contact your dealer.
The Paper Size setting may be
incorrect. Make sure the correct paper size is set
in the Tray menu on the control panel.
Cause What to do
Your paper may be moist or
damp. Do not store your paper in a humid or
damp environment.
The Toner Save mode may be
on. Turn off the Toner Save mode using the
printer driver or the printer’s control
panel menus.