MCZ Cap NATURAL - Manual (Page 69)

A
A
B
B
o
p
q
r
o
p
q
r
A
B
A
x
x
67
15-CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
CLEANING THE EXCHANGER
Remove the top when the stove is cold. Next, at the front of the stove, near the exchanger, remove plates “r” by loosening
screws “q” and loosening screw “x”. On the side of the exchanger, loosen screws “o” and remove plates “p” (one on the right
and one on the left).
If needed replace the gasket.
ATTENTION!
Correctly replace the gasket.
FIGURE: TRAY STOVE