MCZ PowerBox COMPACT - Manual (Page 39)

Chapter 4
INSTALLATION AND USE MANUAL
page
39
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
IMPORTANT NOTE
It takes 10 to 15 minutes for the stove to start up, and
another 10 to 15 minutes before sufficiently hot air comes
out.
Take this into account when setting the start time.
Likewise, stove shutdown requires about 30 minutes,
during which the heat stored up by the stove is released
into the room. Keep this in mind for substantial fuel
savings.
4.12.3. TIMER de-activation.
To de-activate the timer, access the menu again by means of button 6
until the icon
PROGRAM
appears, then use button 5 to select:
OFF
Then wait 7 seconds for confirmation or again press button 6 to
confirm.
This de-activates the TIMER.
4.13. PRE-SET WEEKLY AND DAILY PROGRAMMES
4.13.1. Weekly programmes
The weekly programmes selected by MCZ and stored in the memory of
the remote control were designed to meet the needs of most users who
are out of the home during working hours (factory workers,
shopkeepers, office workers, shift workers) as well as those who are
usually at home (homemakers, senior citizens, etc.).
Also, programming has been provided for those who use the stove in a
weekend home (e.g. a home in the mountains) and want to find the
home warm when they get there.
If you have even more specific needs which are not met by any of
these weekly programmes, you can customize weekly programme P99
using seven different programmes for each single day of the week (see
chapter 4.11.2).
PROGRAM