MCZ Goya User Manual
Page 11
Advertising
INSTALLATION AND USE MANUAL
Chapter 3
GOYA
page
11
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
The part of the threaded bar that protrudes from the wall must be about 6 mm. You can dispose of the washer
you have removed, but you MUST keep the solid nut
Install the Goya frame so that the protruding parts of the threaded bars enter the holes in the side of the frame.
Fasten the cladding using the same solid nuts which were previously removed from the butterfly anchors.
SPALLA
LATERALE
BARRA FILETT.
( 6 MM)
When assembly is complete, the Goya frame must be aligned with the fireplace stove and with the firebed flush
with the Puro65 door base (see drawing).
Advertising