MCZ Goya User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
GOYA
page
7
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FORMA PURO65 FIREPLACE STOVE
Place the Forma Puro 65 in the desired position and at a safe distance from the rear wall. Raise the
fireplace stove 385 mm (= height of Goya firebed) from the floor. Minimum height variations may be made a
second time, if necessary, during installation of the cladding.
N.B. It is necessary to create a support base upon which to fasten the Forma Puro65. The unit must
be stable and firmly in contact with the floor.
PROFILO
COPRIBORDO
DISTANZA
PAVIMENTO
DI SICUREZZA
BASE APPOGGIO
FORMA PURO
385
Install the unit Forma Puro65 in accordance with the instructions in the respective
Manual for Installation and
Use and run a quick test for proper operation. If the test is successful, you can install the Goya cladding.