Enterasys Networks D-Series - Manual (Page 410)

RMON Monitoring Group Functions
15-2 RMON Configuration
History Records periodic statistical
samples from a network. Sample period, number of
samples and item(s) sampled. “ show rmon history ” on
page 15-6
“ set rmon history ” on
page 15-7
“ clear rmon history ” on
page 15-7
Alarm Periodically gathers
statistical samples from
variables in the probe and
compares them with
previously configured
thresholds. If the monitored
variable crosses a
threshold, an event is
generated. Alarm type, interval, starting
threshold, stop threshold. “ show rmon alarm ” on
page 15-9
“ set rmon alarm properties ”
on page 15-10
“ set rmon alarm status ” on
page 15-11
“ clear rmon alarm ” on
page 15-12
Event Controls the generation and
notification of events from
the device. Event type, description, last
time event was sent. “ show rmon event ” on
page 15-13
“ set rmon event properties ”
on page 15-14
“ set rmon event status ” on
page 15-15
“ clear rmon event ” on
page 15-15
Filter Allows packets to be
matched by a filter
equation. These matched
packets form a data stream
or “channel” that may be
captured. Packets matching the filter
configuration. “ show rmon channel ” on
page 15-17
“ set rmon channel ” on
page 15-18
“ clear rmon channel ” on
page 15-19
“ show rmon filter ” on
page 15-19
“ set rmon filter ” on
page 15-20
“ clear rmon filter ” on
page 15-21
Packet
Capture Allows packets to be
captured upon a filter
match. Packets matching the filter
configuration. “ show rmon capture ” on
page 15-22
“ set rmon capture ” on
page 15-23
“ clear rmon capture ” on
page 15-24
Table 15-39 RMON Monitoring Group Functions and Commands (Continued)
RMON
Group
What It Does... What It Monitors... CLI Command(s)