Medal Sports BJ1355407 - Manual (Page 9)

8
FIG. 5
X 2 21
X 2 20
X 4 19
17 X 13
18 X 13
23 X 16
22 X 16
X 26 A7
X 26 A6
19
19
19
19
21
21
20
20
= BLACK
= IVORY
ORDER OF PLAYERS
(Overhead View)
FIG. 5A
FIG. 5C
A6
45
18
22
22
23
23
20
FIG. 5B
P1
P2
19
19
21
20
The Hole
19
20
21
19
Note: The handles (#25) should be on
the same side of the rods for the same
team, and each team's players will be
facing their opponent.
12.
13.
14.
15.
Please reverse the Soccer Frame (pre-installed, see FIG.5) , and then slide the Rods (#19-21) through
the Rod Bushings (#P1) on one Soccer Side Apron (#1) in the order as shown in Fig.5 and 5A.
Note: The player Rods have a hole at their end where the Handles (#25) will go.
Place the Rod Bumpers (#23), Rod Washers (#22) and Players (#17 and #18) onto the Player Rods
(#19, #20 and #21) in the order as shown in Fig.5, 5A and 5B.
Now insert the Rods through the Rod Bushings (#P1) on the opposite Soccer Side Apron (#1).
Attach the Players (#17 or #18) to the Rods (#19 -21) using one Bolt (#A6) and one Nut (#A7) per Player.
SeeFIG.5C.
Note: The goalie should be at the left side of each player.
FIG.5
A7
1