Precision Digital PD6300 - Manual (Page 93)

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
93
Display Parameter Action/Setting Description
On 1 On Set relay 1 On time delay
O-rang Overrange Program mA output for display overrange
Out 1 Output 1 Program output 1 value (e.g. 4.000 mA)
Out 2 Output 2 Program output 2 value (e.g. 20.000 mA)
pass Password Enter the Password menu
Pass 1 Password 1 Set or enter Password 1
Pass 2 Password 2 Set or enter Password 2
Pass 3 Password 3 Set or enter Password 3
prog Program Enter the Program menu
Prog E Programmable
exponent Set meter for programmable exponent and
enter exponent value
rATE Rate Assign relay to rate
RELaY Relay Enter the Relay menu
reset Reset To access the Reset menu
rht Round horizontal
tank Set meter for round horizontal tank volume
calculation
Right Right arrow button
RLY 1 Relay 1 Relay 1 setup
RLY 2 Relay 2 Relays 2-8 setup
Note: Relays 5-8 are shown, only if expan-
sion relay module is installed.
Rly d Disable relay
Rly E Enable relay
RSt 1 Reset 1 Program reset point 1
Rst Gt Reset
grand total To reset grand total
Rst Hi Reset high Press Enter to reset max display
Rst HL Reset
high & low Press Enter to reset max & min displays
Rst Lo Reset low Press Enter to reset min display