Oki ColorPainter E-64s - Manual (Page 30)

Printer rear (supply side)
29
•USB port
Used to connect a USB drive to the printer.
•USB connector
Used to connect the printer to a computer.
•Pressure roller up/down lever
A lever used to fixe or release the media.
Moves together with the pressure roller lever at
the printer front side.
•Position to install optional exhaust attachment
•Power inlet
Connect the power cable to the power inlet.
•Media holder
To be installed at both ends of
the roll media.
•Caster
Set the lock to OFF when moving the printer and
set the lock to ON when locking the printer.