RISCO Group ACUS - Manual (Page 16)

User Manual for ACUS Installer
Uncontrolled when printed © RISCO Group 10
15. Replace ‘localhost’ with <Server Name>. Enter the server name where your AMAC Services are
currently running. For example, enter 01HW183344.
Note: By default, each service uses a port through which the client communicates with the server.
When you point the client application to the machine where AMAC or RMAC service is running,
ensure that you specify the port number which should be used for the communication between
Service and Client. A same port may not be used for AMAC and RMAC.
When you want to use a different port, specify the port number in the format <machine address> :
<port number>.
16. In the Enable Events for SmartClient drop-down list, select Yes to enable event from local DCC that
is SmartClient. Select No to disable the events from SmartClient.
17. Click Next. The Ready to Install the Program dialog box appears.
Figure 13: Ready to Install
18. Select the Create Shortcut on Desktop check box. When ACUS is completely installed, the shortcut
will appear on your desktop.
19. Click Install. The Installation progress window appears.