3repairing or removing acus – RISCO Group ACUS User Manual
Page 20
Advertising
User Manual for ACUS Installer
Uncontrolled when printed
© RISCO Group
14
3
Repairing or Removing ACUS
You can repair or remove ACUS in case there were any defects or corrupt files during installation. To repair
ACUS, perform the following steps:
1. Go to Start
→ All Programs → Risco Axes Plus → ACUS → Repair/Remove ACUS. ACUS
InstallShield Wizard screen appears.
Or
• Go to Start → Control Panel → Add or Remove Programs. Select ACUS Client and click Change.
ACUS InstallShield Wizard screen appears.
Figure 17: Repair/Remove ACUS
2. Click Next. The Program Maintenance dialog box appears.
Advertising