RISCO Group ACUS - Manual (Page 3)

User Manual for ACUS Installer
Uncontrolled when printed © RISCO Group ii
Quick Guide for Installing ACUS
Prerequisites for installation:
• Machine where ACUS will be installed has Windows XP or Windows Vista Operating System.
• AMAC and RMAC Services are installed and running successfully.
Table 1: Installation Checklist
Steps Additional Information in the
Manual
1. Verify if all the prerequisites are fulfilled. Pg no. 1,
1.1 ACUS Environment
.
2. Go to the location where the ACUS InstallShield Wizard is
located.
Pg no. 2,
2.1 Installing ACUS
.
3. Double-click the ACUS Client icon and follow the steps as
given in the wizard.
Pg no. 2,
2.1 Installing ACUS
.
4. In the Change Configuration dialog box, enter the
machine name where RMAC services are running.
Pg no. 10, Figure 12: Change
Configuration .
5. Continue with the steps in the Wizard. -
6. After the application is installed, you may view the readme
file or directly run ACUS from your machine.
Pg no. 12, Figure 22: Installation
Complete .
The installation manual describes the installation steps in detail in the further sections.