RISCO Group ACOS - Manual (Page 44)

User Manual for ACOS
Uncontrolled when printed © RISCO Group 36
Figure 29: Main Installer Details
4. Make changes wherever required. After an installer is created, immediately the login
credentials of the Main Installer are sent to the email ID of the Main Installer. You can click
Re-send to resend the email.
5. Click
Apply. The changes are saved and the message, “Installer Company updated
successfully” appears.
As per your requirement, you can click any of the buttons as described below.
Field Name Description
Undo Changes
If you are not satisfied with the edits that you made, click Undo Changes. This
will not save the changes and the original settings are restored.
OK
The changes are applied, saved and the window is closed. You return to the
home page.
Delete
The Installer Company is deleted.
Cancel
The Configure Installer Company window is closed and you return to the home
page.
Note: You can use the and buttons to go to the previous and next Installer
Companies and configure them.