RISCO Group LightSYS - Manual (Page 2)

2 LightSYS Quick User Guide
Indicators:
(Power):
On: Power OK, No troubles
Off: No power
Rapid Flash
:
System trouble
(Ready):
On: Ready to arm
Off: Not ready to arm
Slow Flash: Ready to arm
with open Exit/Entry zone
(Arm) / RED LED
On: System armed
(Away or Stay)
Off: System disarmed
Slow Flash: System is in
Exit Delay
Rapid Flash
:
Alarm
(Tamper) :
On: Tamper alarm
Off: No tamper alarm
( Stay / Bypass):
On: System armed at Stay /
Bypass zones in the system
Off: No bypass zones
(Fire):
On: Fire alarm
Off: No fire alarm
Flash: Fire trouble
Edit User Code
1. From the main display press .
2. Enter master code (default code 1234) followed by .
3. Scroll to the option Codes/Tags > .
4. Scroll to Define and press .
5. Select a user and press .
6. Select Edit Code and press .
7. Enter the new code followed by .
8. To edit user label scroll to Edit Label and enter label.
9. Repeat the above steps for additional codes.
Assign Proximity Tag
1. Follow steps 1-5 of the Edit User Code above.
2. Select (Re)Write tag and press .
3. Within 10 seconds, approach the proximity tag to the keypad.