Retrotec Flow Finder MK 2 - Manual (Page 8)

Page 8 of 17
M:\PDF\Source\Manual-FlowFinder mk2\Manual-FlowFinder mk2.docx © Retrotec Inc. 2014
4. Charging the battery
DO NOT charge the battery while it is mounted on the FlowFinder body. Damage may occur. Remove
the battery pack by turning the inner white disc anti-clockwise until the knob comes loose. Remove the
battery pack by sliding it over the pin. Connect the charger to the battery. Plug the charger into a power
outlet.
LED indicates the status of the charger as follows:
Yellow: charger not connected to battery
orange: fast charging
green-yellow: charging complete
green: trickle charging
orange-green: ERROR