Riello UPS PowerShield³ - Manual (Page 50)

50 • Advanced UPSMON Configuration UPSMON User Manual
2.5 Job configuration
The jobs configuration menu is used to define the jobs that will be executed when an event of the UPS occurs. It is possible to configure
multiple jobs for a particular event. It is possible to execute an external command defined by the user. Using the jobs configuration menu
it is possible to launch an external editing program to write a user defined shutdown script. The user defined shutdown script is executed
before the normal system shutdown. This can be used for specific commands, which will be executed before the shutdown, for example,
stop the web server, close some special application or shutdown database server. The name of this script is ups_shut.scr for the UNIX
system.
ATTENTION: If you specify an incorrect command in the user shutdown script or this command stops (not correctly ended)
then the Upsagent will not provide a correct system shutdown and thus possibly lose some data or a failure on the file system
will occur. The last command in the user shutdown script must be the command to shutdown of system (except Windows
versions – the shutdown is executed by using the system routines directly from the Upsagent). In some operating system it is
possible change the script ups_mess , which is used to send messages to users about the UPS status.
Action name Action description
Disable all jobs Enables or disable all of the jobs, if selected no jobs can be executed.
Default All
Used to reset all of the parameter to the default state.
For each event, it is possible to set an action from the list below:
1. Log event (L)
2. Execute file (E)
3. Local message (O)
4. Broadcast message (B)
5. System shutdown (S)
6. Email (E)
7. SMS (M)
8. Call to teleguard ©