RIGOL DS6000 Series - Manual (Page 38)

RIGOL
2 User’s Guide for RP7000 Series Active Probe
Probe Introduction
RP7000, with more than 1.5GHz bandwidth, is an active probe solution for high
frequency application. It can be used to measure differential and single-ended
signals with better common mode rejection. RP7000 uses plug-on socket probe
head and supports 4 types of interchangeable probe heads to optimize the
performance and usability. Besides, its replaceable probe tip prolongs the
service life of the probe and the probe tip spacing can be precisely adjusted to
fit different test point spacing.
RP7000 is compatible with the auto-identification port of
RIGOL
DS6000/MSO4000/DS4000 series oscilloscope and can be recognized and
configured automatically by this port. Its snap-in BNC connector enables easier
connection with the oscilloscope.
RP7000 provides various accessories and options and multiple replaceable
components which make it applicable to be used in different tests and
measurements.