RIGOL DS6000 Series - Manual (Page 60)

RIGOL
24 User’s Guide for RP7000 Series Active Probe
General Care and Cleaning
General Care:
Do not place the probe and its accessories in places where they will be exposed
to sun light for long periods of time.
CAUTION
Keep the probe and its accessories away from any corrosive liquid.
Cleaning:
Clean the probe and its accessories regularly according to their operation
conditions using the method below.
1. Disconnect the probe from the oscilloscope or voltage source.
2. Remove the loose dust on the exterior of the probe and its accessories
using a lint-free cloth (with mild detergent or water).
WARNING
Make sure the probe is completely dry before using it to avoid
short circuit and personal injuries.