RIGOL DS1000B - Manual (Page 29)

Command Systems RIGOL
Programming Guide for DS1000B Series 2-17
Command Format:
:DISPlay:PERSist {{1|ON}|{0|OFF}}
:DISPlay:PERSist?
Function:
The command sets waveform persist function ON (The waveform is shown until
waveform persist function is off or relevant settings are changed.) or OFF (The
waveform is updated as high refresh rate).
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:DISP:PERS ON Set waveform persist function on.
:DISP:PERS?
Return 1.
4. :DISPlay:MNUDisplay
Command Format:
:DISPlay:MNUDisplay <time>
:DISPlay:MNUDisplay?
Function:
The command sets the display time of menu. The menu will hide after the
display time. The <time> may be 1s, 2s, 5s, 10s, 20s or INFinite (display all the
time).
Returned Format:
The query returns 1s or 2s, 5s, 10s, 20s, Infinite.
Example:
:DISP:MNUD 10s Set the display time as 10s.
:DISP:MNUD?
Return 10s.
5. :DISPlay:MNUStatus
Command Format: