RIGOL DS1000B - Manual (Page 64)

RIGOL Command Systems
Programming Guide for DS1000B Series 2-52
Command Format:
:CHANnel<n>:DISPlay {{1|ON}|{0|OFF}}
:CHANnel<n>:DISPlay?
Function:
The command sets the channel ON or OFF. The <n> may be 1, 2, 3 or 4.
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Examples:
:CHAN2:DISP ON
Set channel 2 on.
:CHAN2:DISP? Return 1.
4. :CHANnel<n>:INVert
Command Format:
:CHANnel<n>:INVert {{1|ON}|{0|OFF}}
:CHANnel<n>:INVert?
Function:
The command sets waveform invert function ON (the inverted waveform is
display) or OFF (the normal waveform is display). The <n> may be 1, 2, 3 or 4.
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:CHAN2:INV OFF Set the invert function of channel 2 off.
:CHAN2:INV?
Return 0.
5. :CHANnel<n>:OFFSet
Command Format:
:CHANnel<n>:OFFSet <offset>
:CHANnel<n>:OFFSet?