Key:quickmeasure, Key:quickprint, Key:auto – RIGOL DS1000B User Manual
Page 95: Key:run, Key:single
Advertising
RIGOL
Programming Guide for DS1000B Series
2-83
9. :KEY:QUICKMEASure
Command Format:
:KEY:QUICKMEASure
Function:
The command sets quick-measurement function on or off. And it could be set in
Measurement menu.
10. :KEY:QUICKPRINt
Command Format:
:KEY:QUICKPRINt
Function:
The command prints and saves the screen.
11. :KEY:AUTO
Command Format:
:KEY:AUTO
Function:
The command sets oscilloscope automatically to display the waveform to be
optimal condition.
12. :KEY:RUN
Command Format:
:KEY:RUN
Function:
This command controls the running state of the oscilloscope. The oscilloscope
will cutover between RUN and STOP when sending this command continually.
13. :KEY:SINGLe
Advertising