RIGOL M300 - Manual (Page 48)

RIGOL Chapter 2 Command System
Programming Guide for DM3000 2-36
1. :TRIGger:SOURce
Syntax
:TRIGger:SOURce?
:TRIGger:SOURce {AUTO|SINGLE|EXT}
Function Set the trigger source of the measurement to AUTO, SINGLE or
EXT.
The query returns AUTO, SINGLE or EXT.
Default AUTO
2. :TRIGger:AUTO:INTErval
Syntax
:TRIGger:AUTO:INTErval?
:TRIGger:AUTO:INTErval
<value>
Function Set the display interval of the multimeter. The default unit is ms.
The query returns the interval with the unit (ms).
Explanation The range of <value> is related to the current reading resolution.
DM306x
Reading resolution <value> Default
4 ½
(ACV/ACI, 3 ½)
30 ms - 7000 ms 30 ms
5 ½ 200 ms - 7000 ms 200 ms
ACV/ACI, 4 ½ 300 ms - 7000 ms 300 ms
6 ½
(ACV/ACI, 5 ½)
400 ms - 7000 ms 400 ms
DM305x
Reading resolution <value> Default
3 ¾
(ACV/ACI/DCI, 3 ½)
30 ms - 7000 ms 30 ms
4 ¾
(DCI, 4 ½)
200 ms - 7000 ms 200 ms
ACV/ACI, 4 ½ 300 ms - 7000 ms 300 ms
5 ¾
(ACV/ACI/DCI, 5 ½)
400 ms - 7000 ms 400 ms
Example Set the interval to 1000 ms:
:TRIGger:AUTO:INTErval 1000
The query returns 1000 ms.
3. :TRIGger:AUTO:HOLD
Syntax
:TRIGger:AUTO:HOLD?