RIGOL M300 - Manual (Page 51)

Chapter 2 Command System RIGOL
Programming Guide for DM3000 2-39
:CALCulate Commands
The commands are used to set the calculation parameters of the instrument. The
commands include:
 :CALCulate:FUNCtion
 :CALCulate:STATistic:MIN?
 :CALCulate:STATistic:MAX?
 :CALCulate:STATistic:AVERage?
 :CALCulate:STATistic:COUNt?
 :CALCulate:STATistic:STATe
 :CALCulate:NULL:STATe
 :CALCulate:NULL:OFFSet
 :CALCulate:DB:STATe
 :CALCulate:DB?
 :CALCulate:DB:REFErence
 :CALCulate:DBM:STATe
 :CALCulate:DBM?
 :CALCulate:DBM:REFErence
 :CALCulate:LIMIt:STATe
 :CALCulate:LIMIt?
 :CALCulate:LIMIt:LOWEr
 :CALCulate:LIMIt:UPPEr