Rose Electronics Xtensys - Manual (Page 10)

4 Installation and Operations Manual
Connecting the KVM
station
The KVM station connects directly
to the Xtensys User Station. The
KVM stations keyboard, monitor,
and mouse cables connect directly
to the corresponding connectors
on the User station.
.
Connecting
the User
Station to
Xtensys
Switch
The user stations
connect directly to
the Xtensys Switch
using industry
standard CATx
cable. Depending
on the User Station
and Switch model
used, up to 4
different Xtensys
Switches can be
connected to a
single User Station.
Xtensys Switch Xtensys User
Refer to the Xtensys switch users manual for the complete system
installation procedure.
User Station
KVM Station
CATx cable connects to one or
four Xtensys switches depending
on the model
All models install basically in the same manor.
Connect a CATx cable from the User station to
the KVM input port on an Xtensys switch.
The XTR-11 connects to 1 Xtensys switch
The XTR-12 connects to 2 Xtensys switches
The XTR-14 connects to 4 Xtensys switches