Rose Electronics Xtensys - Manual (Page 9)

Installation
Installation and Operations Manual 3
User Station Installation
The flexibility of the Xtensys system enables it to configure to almost any
system environment.
The User Station is available with one local KVM Station connectors and
1, 2, or 4 RJ45 link ports.
The Switch is available with one local KVM station connectors, 0, 2, 4, 8, or
16 remote KVM connections, and 8, 16, 32, 48, or 64 RJ45 CPU ports.
All connections from the User Station to the Switch and from the Switch to
the computers, servers, and serial devices use CATx cabling.
The total CATx cable length from the User Station to the Switch and from
the Switch to the connected computers is 1,000 feet max.
Figure 1 shows a typical installation of the XTR-11 user station. The
XTR-14 user station can connect via CATx cable to four Xtensys switches.
Using simple keyboard commands or the on-screen list, you can easily
switch the user station to any of the computers connected to the Xtensys
switches.
Figure 1- Typical Installation
Xtensys User
station
Xtensys switch
Up to a total of 1,000 ft. of
CATx cable