Euphonix EuCon - Manual (Page 14)

professional control surface
Artist Series
USER GUIDE
SETUP AND INSTALLATION
14
Two larger, detached riser brackets elevate and angle the unit more than the
foldout legs. Use moderate force to snap them into the bottom panel as shown
in Figure 2-1.
To remove the riser brackets:
1. Slide the side panels off (Figure 2-2 left).
Figure 2-2 Removing side panels (left); removing riser brackets
2. Press the tabs to release the riser brackets (Figure 2-2 right).
3. Lift the riser bracket out of the MC Mix to remove
2.1.2 Physically Linking Artist Series Devices
MC Mixes can be physically attached to each other to form a larger, stable control
surface. An MC Control can also be joined to the MC mixes. See Surfaces on
page 41 to use EuControl to link the surfaces in the desired order.